WLC-SUB-PIN / APPLICATION CONFIGURATION
Submersible Marine Load Pin
Submerged gates, mooring hardware and marine sheave reaction loads.
Specify your applicationEnvironmental configuration
| Protection / maximum submersion depth | Define depth, duration, pressure cycles and allowable pressure-induced measurement error. |
|---|---|
| Body / enclosure material | Marine stainless or titanium housing review |
| Cable & connector | FEP / PUR jacket and sealed exit by application; wet-mate connector mating pair by review. |
| Capacity & direction | Provide required N / kN / lbf force or kg / tonne weighing capacity, overload and force direction. |
| Output options | mV/V bridge; internal 4–20mA, 0–10V or RS485 Modbus subject to configuration. |
| Drawings & qualification | Confirm dimensions, mounting and configuration-specific calibration / environmental test evidence before order. |
Application inputs
Provide pin drawing, bearing span, anti-rotation arrangement and load direction.
Complete the measurement chain
- Internal sealed amplifier for the specified output and cable run.
- Wet-mate connector and special FEP / PUR or stainless-braided cable.
- 316L washdown summing box and suitable weight indicator.
- Material upgrade based on corrosion and mechanical review.
This page defines a configuration family. Request the selected drawing, rated capacity, environmental limits, availability and quotation for your installation.
Understand IP68 / IP69K and pressure compensation →START WITH YOUR OPERATING CONDITIONS
Tell us what the sensor
has to withstand.
Share the force range, environment, cable route and mounting drawing.